Utilizing Japan’s 1000-year-old concept of cutting on the pull, rather than the push stroke, these saws are an absolute delight to use. Because they cut on the pull stroke, the blades are under tension while cutting, so binding and buckling are eliminated. This allows a much thinner blade to be used, in turn reducing the volume of wood removed in each cut compared to conventional saws. This, together with their unique and very sharp tooth design, provides exceptional cutting speed, control, and accuracy, and greatly reduced effort. If you have ever felt clumsy and unskilled when using a hand saw, try one of these pull-stroke saws. We promise you will be amazed! The saw blades are made of chrome-finished, rust-proof high quality steel. The teeth are individually diamond honed, then electric impulse-hardened for long wear. Each tooth actually has three cutting edges. Blades remove in seconds for replacement or compact storage just by pressing a release button on the handle. Fine-Cut Handsaws
	#10-2410 (top) #10-2420 (bottom)
#10-2410: 16" overall, 10 5/8" blade, 19 pt., .014" kerf. Replacement blade: #01-2410 The very thin kerf blade is ideal for trimming grand shanks after hanging hammers. Just clamp a section of shanks together, lay the blade flat against the hammer tails below the shanks, and saw upward. An entire section of shanks can be trimmed flush to the tails in just a minute or two. A joy to use whenever accurate, smooth cuts are required, this saw easily handles hardwoods up to 2" thick. Price: $28.00; repl. blade: $20.00
#10-2420: 16" overall, 10 5/8" blade, 15 pt., .028" kerf. Replacement blade: #01-2420 Similar to the #2410 but with a thicker blade and slightly larger teeth. The stiffer blade is useful where binding might occur and for heavier duty use. Also, the shorter backbone along the top of the blade allows longer cuts in plywood or wide boards. This is a great general purpose cut-off saw around the shop. Price: $28.00; repl. blade: $20.00
	#10-2450
#10-2450: 23 3/4" overall, 8 1/2" blade, 19 pt. cross cut & 9 pt. rip, .030" kerf. Replacement blade: #01-2450 The 2450 is a double-edged blade with the traditional Japanese handle design. Good for trimming dowels flush to a surface (the blade can be laid flat on a surface and the handle flexed away), and for making long cuts in wide panels. Price: $32.00; repl. blade $21.00
	#10-2204
#10-2204:  " 12 1/2" overall, 6 1/2" blade, 26 pt., .021" kerf Replacement blade: #01-2204 The 2204 is a very fine tooth. flexible saw for small detail work like trimming dowels and hammer shanks.Useful wherever precision cuts in small parts are needed.  Price: $16.00; repl. blade $11.00

	#10-2315
#10-2315: 22" overall, 15" blade, 10 pt., .050" kerf. Replacement blade: #01-2315 This saw has larger, deeper teeth than the Fine-Cut saws, and is excellent for cutting larger stock. Whether building a work bench, making shop fixtures, or adding on a room, this saw does the work of a power saw without all the noise and danger. Very fast cutting and easy to use. Price: $30.00; repl. blade $22.00